Filter
Top Products
SKU 45804 PAGE 8
SYMBOLOGY
V ~
A
xxxx/min.
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
no
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Saw. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
2. Industrial applications must follow OSHA requirements.
3. Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect the operation of this product. Replace or repair
damaged or worn parts immediately.
4. Do not use this tool for cutting metals or brittle materials. Do not cut dangerous
materials, such as asbestos which can cause harmful dust or vapors.
5. Allow the Saw Blade to spin up to full speed before feeding wood into it. When
turning it off, allow the Saw Blade to spin down and stop on its own. Do not press
against the Saw Blade to stop it.
6. Never pass hands directly over the Saw Blade when cutting the workpiece.
Push the workpiece into the Saw Blade, using the Push Stick (37).
7. Never attempt to remove material stuck in the moving parts of the Table Saw
while it is plugged in and running.
8. Turn off the Table Saw if the woodstock is to be backed out of an uncompleted
cut.
9. Always feed the woodstock into the Saw Blade and against its rotation.
10. Make sure the woodstock is supported at all times while sawing. Use a Roller
Stand (not provided) with larger woodstocks if necessary.