SKU 06852 For technical questions, please call 1-800-444-3353. PAGE 6
PRODUCT FEATURES
NOTE: Prior to assembling and operating the Belt/Disc Sander, it is important to fa-
miliarize yourself with all of the machine’s major components. Failure to do so
may result in personal injury and/or damage to the machine and workpiece being
sanded. (See Figure B, and refer to the “Operating Instructions” section in
this manual.)
9” SANDING DISC
(15)
6” SANDING
BELT (2)
TABLE (1)
MITER GAUGE
(3)
BACK STOP
(39)
POWER
SWITCH
(53)
POWER
CORD
(55)
LOCK KNOB/ADJUST NUT ASSY. (44)
FIGURE B
STAND
(56
FRAME
(64)
BASE
(51)
PULLEY
COVER
(22)
SAND BELT
FRAME (40)
18. WARNING: People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 16
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.