Filter
Top Products
SKU 91130 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 26
and 27 are included. If any parts are missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this manual as soon as possible.
Item Description
Electrical Requirements 120V / 60 Hz / 750 Watts / 4.3 Load Amps
1 HP Motor / 8,400-27,800 RPM Variable Speed
3- Prong, Grounded, Power Plug
Table Dimensions 27” Wide x 18” Deep x 1-1/2” Thick
Table Height 38”
Overall Height 43-1/2”
Cutting Depth 1-27/64”
Collet Capacity 1/4” And 1/2”
Accessories 1/4” Collet / 1/2” Collet / Miter Gauge
Guide Fence / Feather Board / Wrench
Dust Collector Port
Weight 75.6 Pounds
REV 08/04