Filter
Top Products
SKU 91130 For technical questions, please call 1-800-444-3353. Page 6
7. Make sure the Power Switch is in the “OFF” position before plugging in the
Power Cord.
18. Do not use this product if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
8. Do not use this Router for cutting metals or brittle materials. Do not cut
dangerous materials, such as asbestos which can cause harmful dust or vapors.
9. Before using the Router, make sure the router bit (not included) is properly
mounted. Make sure the router bit is not bent or cracked.
10. Allow the router bit to spin up to full speed before feeding wood into it.
When turning off the Router, allow the router bit to spin down and stop on its
own. Do not press against the router bit to stop it.
11. Do not force the material into the router bit when cutting. Apply moderate
pressure, allowing the router bit to cut without being forced.
12. Never attempt to remove material stuck in the moving parts of the Router
while the machine is plugged in and running.
13. Whenever possible, use safe, practical ways to hold and support the
workpiece.
14. Turn off the Router if the material is to be backed out of an uncompleted
cut.
15. Avoid serious personal injury. Always keep hands and fingers away from
the spinning router bit.
16. Store idle equipment. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment,
and keep out of reach of children.
17. Use eye, hearing, and breathing protection. Always wear ANSI approved
safety impact eye goggles, hearing protectors, and dust masks or respirator
when working with the Router Table.
19. Industrial applications must follow OSHA requirements.
20. Never leave the Router running unattended. Turn off the power, and do not
leave the machine until it comes to a complete stop.