Filter
Top Products
NOTE:
The value (X) does not include Auto LUN XP, Flex Copy, Snapshot XP, Hitachi FlashCopy Mirroring,
or Hitachi FlashCopy Mirroring Version 2 pairs. If these pairs exist, BC paircreate operations may
fail,evenwhen(X)islessthan8,191.
• Reserve:X(Y)/Z,where:
X = total number of BC reserved volumes
Y = total number of BC and ShadowImage for z/OS reserved volumes
Z = maximum number of reserved volumes that can be created in one array (BC/ShadowImage
for z/OS /Auto LUN XP/Flex Copy)
NOTE:
The value (Y) does not include Auto LUN XP, Flex Copy, Snapshot XP, Hitachi FlashCopy Mirroring,
or Hitachi FlashCopy Mirroring Version 2 pairs. If these pairs exist, the BC paircreate operation
may fail even when (Y) is less than 8,191.
• Use the Display Filter button to filter volumes displayed in the Volume list.
• The Previou
s button returns to the previous page of the Volume list. This button is available only
when the num
ber of volumes defined in the disk array exceeds 1,024, which is the maximum
number of volumes that can be displayed on one page. The button is unavailable if the total
number of defined volumes is less than 1,024.
• The Next button displays the next page of the Volume list. This button is available only when the
number of volumes defined in the disk array exceeds 1,024, which is the maximum number of
volumes t
hat can be displayed on one page. The button is unavailable if the total number of
defined vo
lumesislessthan1,024.
• The Apply button performs BC operations displayed in the Preset Volume list in the disk array. If
the specified operations complete successfully, the Preset Volume list is cleared. If an error occurs
during a
n operation, the failed operation remains in the Preset Volume list. To display the error
code an
d message for the failed operation, select the Detail command.
• The Cancel button cancels all operations specified on the Display tab.
To perform BC operations for volumes, select one or more volumes in the Volume list, right-click, and
select
the command (see Volume list and Table 21).
For information about the Snapshot XP tab, see the HP StorageWorks Snapshot XP user guide.
Volume list
TheVolumelist(Figure 27) displays volume/pair information based on filter options selected in the
Tree View box (along the left side of the screen).
NOTE:
You can select up to 512 volumes/pairs in the Volume list.
NOTE:
ThemaximumnumberofvolumesdisplayedintheVolumeListis1,024.Ifthenumberofvolumesdefined
in the disk array exceeds this limit, use the Previous and Next buttons on the upper right of the Volume
listtoturnthepagesoftheVolumelisttoseetheentirelist.
Business Copy XP user guide
55