Filter
Top Products
• Pair Status:
• BC: Displays or hides BC pairs.
• Snapshot XP: Displays or hides Snapshot XP pairs.
NOTE:
If a check box is not selected, all check boxes in each tab are grayed out.
• BC: Check boxes for the pair statuses are available only when you select the Pair check box in the
Attribute box. If you select the check boxes, you can display pairs in those statuses. You must also
select the BC check box in the Pair Status tab to use these check boxes.
• Snapshot XP: This tab is for Snapshot XP pairs, and only appears if Snapshot XP is installed. For
more information, see the HP StorageWorks Snapshot XP user guide.
• OK button: Applies the settings, and closes the Display Filter window.
• Cancel button: Resets the settings, and closes the Display Filter window.
NOTE:
Filter settings are only effective within the current BC session. If you switch to another program feature
(suchasLUNManagerorContinuousAccessXP)orclickabuttononthetoolbar,thesettingsarereset.
Preset Volume list
The Preset Volume list is located below the Volume list, and lists the specified operations (volume/pair
information) that have not been performed in the disk array.
Figure 31 Preset Volume list
Use the Preset Volume list to hold multiple settings of the same operation only. You cannot display
different types of operations (for example, pairsplit and pairresync) in the Preset Volume list at the same
time. You can also cancel the operations in the Preset Volume list.
The Preset Volume list displays the following information of specified operations:
• Port: Port ID (cluster and channel number) of each volume. If L2 pairs exist, a different icon
displays.
• Group (G-ID): Host group of each volume.
• CLPR (P): The cache logical partition (CLPR) of the P-VOL.
• CLPR (S): The cache logical partition (CLPR) of the S-VOL.
• Path (LUN): CU:LDEV (control unit image:logical device ID) of each volume.
NOTE:
An LDEV number ending with # (for example, 00:01#) indicates the LDEV is an external volume.
• MU: MU number of a BC cascade pair member volume. For more information about what
appears if you select Snapshot XP pairs, see the HP StorageWorks Snapshot XP user guide.
• Port: Port ID (cluster and channel number) of the first S-VOL of each volume.
• Group (G-ID): Host group of the S-VOL.
• S-Vol Path (LUNS): CU:LDEV (control unit image:logical device ID) of the S-VOL.
60
Business Copy XP (BC) for the Array