Filter
Top Products
18
English
Type of To process crown molding
at
To process crown molding at
Crown Molding
positions 1 and 4 in Fig. 25.
positions 2 and 3 in Fig. 25.
Miter Angle Bevel Angle Miter Angle Bevel Angle
Setting Setting Setting Setting
45° Type right 35.3° left 30° right 30° left 35.3° left 30° right 30°
38° Type right 31.6° left 33.9° right 33.9° left 31.6° left 33.9° right 33.9°
( mark) ( mark) ( mark) ( mark)
(1) Setting to cut crown moldings at positions q and r in Fig. 25 (see Fig. 26):
q Turn the table to the right and set the Miter Angle as follows:
* For 45° type crown moldings: 35.3°
* For 38° type crown moldings: 31.6°
w Tilt the head to the left and set the Bevel Angle as follows:
* For 45° type crown moldings: 30°
* For 38° type crown moldings: 33.9° ( mark)
e Position the crown molding so that the upper surface (A in Fig. 24) contacts the fence as indicated
in Fig. 27.
(2) Setting to cut crown moldings at positions w and e in Fig. 25 (see Fig. 28):
q Turn the table to the left and set the Miter Angle as follows:
* For 45° type crown moldings: 35.3°
* For 38° type crown moldings: 31.6°
w Tilt the head to the left and set the Bevel Angle as follows:
* For 45° type crown moldings: 30°
* For 38° type crown moldings: 33.9° ( mark)
e Position the crown molding so that the lower surface (B in Fig. 24) contacts the fence as in Fig.
29.
Fig. 26 Fig. 28
Fig. 27 Fig. 29
(3) Setting to cut crown moldings at positions q and r in Fig. 25 (see Fig. 30):
q Turn the table to the right and set the Miter Angle as follows:
* For 45° type crown moldings: 35.3°
* For 38° type crown moldings: 31.6°
w Tilt the head to the right and set the Bevel Angle as follows:
* For 45° type crown moldings: 30°
* For 38° type crown moldings: 33.9° ( mark)
e Position the crown molding so that the upper surface (B in Fig. 24) contacts the fence as indicated
in Fig. 31.
q
Bevel
Angle Scale
r
Fence
Base
Miter Angle Scale
Table
Head
Miter Angle Scale
Bevel
Angle Scale
e
Base
Table
Head
Fence
w
Table on Base
Fence
A
B
Fence
Table on Base
B
A