Filter
Top Products
9
English
SPECIFICATIONS
Item Model C 10FCD
Motor Type Series commutator motor
Power source Single-phase AC 60Hz
Voltage (Volts) 115
Full-load current (Amp) 13
Applicable Outside Dia. 10" (255 mm)
saw blade Hole Dia. 5/8" (15.9 mm)
No load speed 3800rpm
Miter 0°
Max. Height 2-23/32" (69 mm) *Max. Height 3-1/2" (89 mm)
Bevel 0°
Max. Width 5-5/8" (143 mm)
(
*Max. Width 3-5/8" (92 mm)
)
Miter 45°
Max. Height 2-23/32" (69 mm)
Max. Width 3-7/8" (98 mm)
Miter 0°
Max. Height 1-25/32" (45 mm)
Max. sawing Left
Max. Width 5-5/8" (143 mm)
dimensions Bevel 45°
Miter 45°
Max. Height 1-25/32" (45 mm)
Max. Width 3-7/8" (98 mm)
Miter 0°
Max. Height 15/16" (24 mm)
Right
Max. Width 4-3/4" (120 mm)
Bevel 45°
Miter 45°
Max. Height 15/16" (24 mm)
Max. Width 3-11/32" (85 mm)
Miter sawing range Left 0° – 45°, Right 0° – 45°
Bevel sawing range Left 0° – 45°, Right 0° – 45°
Compound sawing range Left (Bevel) 0° – 45°, Left and Right (Miter) 0° – 45°
Right (Bevel) 0° – 45°, Left and Right (Miter) 0° – 45°
Net weight 28.7 lbs. (13 kg)
Cord 2 Conductor type cabtire cable 6.6 ft (2 m)
*Note: 11/16" (17 mm) thick spacer board is required to be attached to the fence.