Filter
Top Products
Maintenance chart
ACTION WHY HOW
Drain air line fi lter daily.
Prevent accumulation of
moisture and dirt.
Open manual petcock.
Keep lubricator fi lled. Keep the Nailer lubricated.
Fill with Hitachi pneumatic tool
lubricant.
Clean fi lter element — then
blow air through fi lter in
direction opposite to
normal fl ow.
Prevent clogging of fi lter with
dirt.
Follow manufacturer’s
instructions.
Clean magazine and feeder
mechanism.
Prevent a jam. Blow clean daily.
Keep push lever working
properly.
Promote operator safety and
effi cient Nailer operation.
Blow clean daily.
Lubricate the Nailer after
nailing.
Extend the Nailer life.
Supply 5 – 10 drops of
lubricant into the Nailer.
Drain air compressor.
Keep the Nailer operated
properly.
Open petcock on air
compressor tank.
20
English
SERVICE AND REPAIRS
WARNING
Only service personnel trained by ●
Hitachi, distributor or employer shall
repair the Nailer.
Use only parts supplied or ●
recommended by Hitachi for repair.
All quality Nailers will eventually require
servicing or replacement of parts because of
wear from normal use.
NOTE
Specifi cations are subject to change without
any obligation on the part of HITACHI.