Filter
Top Products
Operation and Programming
5
(1) or the value previously
monitored is displayed.
(1) or the value previously
monitored is displayed.
(1) or the value previously
monitored is displayed.
(2)The motor runs at the frequency
set by the potentiometer.
(3)The motor stops.
(2)Function code appears. (3) appears.
(5) appears. (6)Preset value is displayed. (7)Newly set value is displayed.
(8)Returns to and
the setting is complete.
(4) or the code
number set in the end of
last setting is displayed.
Power
on
Power
on
Power
on
Press
until
appears.
Press
to set desired
value.
Press
until
appears.
Press key.
Press key.
Press key.
Press key
to store
the value.
*To run the motor, go back to
monitor mode or basic setting mode.
*Pressing key
for a while and back to
Press key to stop the motor.
Press key and turn the
potentiometer clockwise.
Press key.
Press key.
(2)Function code appears.
appears.
(4)Output current value
is displayed.
Press
until
appears.
1. Setting the maximum output frequency
2. Running the motor(by potentiometer)
3. Monitoring output current value
(3)
(Output frequency monitor)