Filter
Top Products
. A complete Parts List is available at www.MillerWelds.com
OM-244 013 Page 17
4-13. Installing Alternative Plug
1 Supplied 230 VAC Plug
Cut cord close to plug.
2 Alternative Plug (230 VAC
Plug Shown)
3 Input (Black Lead)
(Brass) Terminal
4 Input (White Lead)
(Brass) Terminal
5 Ground (Green) Terminal
6 Outer Shell
7 Cord Grip
Strip cord jacket back enough to
separate conductors.
Strip conductors enough to make
good contact with plug terminals.
Make plug connections and reinstall
outer shell and cord grip. Tighten
assembly screws onto shell. Do not
overtighten.
Ref. 801 305-A / 801 611
. This procedure is necessary if the unit is to be connected
to a 208/230 VAC receptacle that requires a plug that is
different from the supplied plug.
Tools Needed:
1
6
7
2
3
4
5
4-14. Cable Management Strap
244 413-A / 244 412-A
1 Cable Management Strap
Coil cables together and secure to
unit using the cable management
strap.
1
1