Insignia NS-46E440NA14 Work Light User Manual


 
71
NS-46E440NA14 Insignia 46" LED TV
www.insigniaproducts.com
Dotted lines or
stripes appear on
the screen.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)
on page 17.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
Checking the digital signal
strength” on page 49.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
The video cable(s) you are using
may be bad. Try a new set.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
Double images.
Use a highly directional outdoor
antenna, cable TV, or satellite
TV.
The picture has a
few bright or dark
spots.
A few bright or dark spots on an
LCD screen is normal. It does
not affect the operation of
your TV.
Problem Solution
Good picture, but
no sound.
Increase the volume.
Make sure that the sound is not
muted.
Make sure that you do not have
headphones connected. When
headphones are connected, no
sound comes from the TV
speakers.
Make sure that the correct
audio mode is selected.
Make sure that the audio cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)
on page 17.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
Checking the digital signal
strength” on page 49.
The audio cable(s) you are using
may be bad. Try a new set.
Poor picture.
Make sure that the room is not
too bright. Light reflecting off
the screen can make the picture
difficult to see.
If an S-VHS camera or a
camcorder is connected while
another connected device is
turned on, the picture may be
poor. Turn off one or more
devices.
Good sound, but
poor color.
Adjust the contrast, color, and
brightness settings. See
Adjusting the TV picture” on
page 41.
Audio noise.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
Problem Solution