Jet Tools -20QT-3 Saw User Manual


 
10
Assembl
y
Handwheel
Attach the handle (A, Fig. 4) to the handwheel
(B, Fig. 4).
Mounting the Table
Important: The table is heavy. Mounting with the
help of another person is recommended.
Referring to Figures 5 and 6:
1. Remove the table insert (A) and tapered
pin (B).
2. Slide the table so the saw blade (D) passes
through the slot where the tapered pin (B) was
located.
3. Rotate the table 90 degrees so that the miter
slot (C) is parallel to the blade (D) and to the
right of the blade when facing the band saw as
viewed in Figure 6.
4. Line up the table (G) to the trunnions so that
the bolts (F
1
, F
2
) feed through the support
bracket (E
1
, E
2
).
For band saw model JWBS-18QT
Secure the table with two lock knobs (H).
For band saw model JWBS-20QT
Secure the table with lock knob (H) to bolt F
1
and lock handle (J) to bolt F
2
.
5. Reinstall the table insert (A) and tapered
pin (B).
Figure 4
Figure 5
Figure 6