Filter
Top Products
6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model VBS-3612 Band Saw. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model Number...........................................................................................................................VBS-3612
Stock Number................................................................................................................................ 414470
Blade Speeds (SFPM) ....................................................................................Low 50-410; High 540-4925
Height Capacity, Maximum (in.) .............................................................................................................12
Throat Capacity, Maximum (in.) .............................................................................................................36
Table Size, Main (L x W)(in.).............................................................................................. 23-5/8 x 27-1/2
Table Size, Auxiliary (L x W)(in.)........................................................................................ 17-3/4 x 27-1/2
Table Height at 90° (in.).........................................................................................................................40
Table Tilt (deg.) ......................................................................................................................10° L, 45° R
Welder (KVA)........................................................................................................................................4.2
Blade Length, approx. (in.)............................................................................................. 195-1/4 – 198-1/4
Blade Width (in.) ............................................................................................................ 1/8 min., 1/2 max.
Motor..................................................................................... 3HP, 3Ph, 230/460V (prewired 230V), 60Hz
Floor Space Required (in.)............................................................................................................. 69 x 32
Net Weight (lbs.)............................................................................................................................... 1,760
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.