Filter
Top Products
8
Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Band Saw
is set up and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
1 Band Saw
1 Fence
1 Feed Screw
1 Miter Gauge
1 Circle Cutting Attachment
1 Shear
1 Tool box, containing:
1 Reversible Screwdriver
2 Socket Head Cap Screws, 5/16” x 1”
2 Socket Head Cap Screws, 5/16” x 5/8”
1 Eye Bolt
1 Knob
1 Set of Hex Wrenches
1 Wrench, 26mm
1 Set of Keys for control panel
1 Set of Keys for rear door
1 Owner's Manual
1 Warranty Card
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.