Lincoln Electric GX 271 Welding System User Manual


 
GX 271 Chopper
E-2
TROUBLESHOOTING
E-2
Observe all Safety Guidelines detailed throughout this manual
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
CAUTION
PROBLEMS
(SYMPTOMS)
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
RECOMMENDED
COURSE OF ACTION
Major Physical or Electrical Damage
is Evident.
Engine will not "crank".
Engine will "crank" but not start.
Engine shuts down shortly after
starting.
Battery does not stay charged.
1. Battery is low.
2. Loose battery cable connections.
3. Faulty engine starter motor.
4. “Battery Circuit” circuit breaker is
tripped.
1. Out of fuel.
2. Engine switch in "OFF" position.
3. Faulty fuel solenoid or faulty PC
board or ignition system.
1. Low oil level.
2. Faulty oil pressure switch or other
engine component.
1. Faulty battery.
2. Loose connections at battery or
alternator.
3. Faulty engine alternator or charg-
er module.
1. Contact your Local Lincoln Authorized
Field Service Facility.
1. Charge Battery.
2. Inspect, clean and tighten.
3. Contact authorized engine Service
Shop.
4. Re-set. If it continues to trip, contact
your local Local Lincoln Authorized
Field Service Facility.
1. Fill tank and start engine.
2. Set switch to "ON" position.
3. Contact your Local Lincoln Authorized
Field Service Facility or authorized
engine service shop.
1. Change oil and oil filter and fill to prop-
er level. Start engine and look for
leaks.
2. Contact your Local Lincoln Authorized
Field Service Facility or authorized
engine service shop.
1. Replace
2. Clean and tighten connections.
3. Consult authorized engine service
shop.