Filter
Top Products
F-76
TROUBLESHOOTING & REPAIR
F-76
REPLACEMENT PROCEDURE
1. With the 5/16" nutdriver, fasten the
digital meter to the cover assembly
with two screws, nuts and lockwash-
ers.
2. Using the phillips head screwdriver,
reattach the meter shield and bezel
assembly.
3. Position the insulation and plug the
PC meter board into the digital
meter.
4. Mount the meter PC board using the
four nuts previously removed.
5. Reattach the molex plug.
6. Close and secure the access door.
DIGITAL METER AND METER PC BOARD REMOVAL AND REPLACEMENT
NA-5
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC