Filter
Top Products
Models No.
Description
PRODUCT
T
ECHNICAL INFORMATION
CONCEPT AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
P 1/ 25
BHR242 (LXRH01*1), BHR243 (LXRH02*1)
Cordless Combination Hammer 24mm (15/16")
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
328(12-7/8)
353(13-7/8)
85 (3-3/8)
213 (8-3/8)
The subject models are 24mm (15/16") Cordless Combination Hammers
powered by 18V Li-ion Battery, featuring:
• Efficient Brushless DC motor provides higher productivity than that of
18V Cordless Combination Hammer model BHR202.
• Able to drill in concrete as fast or faster than 24V Cordless Combination
Hammer model BHR200.
• 3 operation modes (rotation only/ rotation with hammering/ hammering only)
• Quick change drill chuck for models BHR243 (LXRH02*
1) only
• Makita’s first Cordless Combination Hammers with Dust extraction system.
Note: • These products are not compatible with 1.3Ah battery BL1815.
BHR242 (LXRH01*1)
BHR243 (LXRH02*
1)
Normal chuck
For Model and its Chuck systemDust extraction system
DX01
Quick change chuckDX02
Battery
Voltage: V
Cell
Capacity: mm (")
Charging time: min.
18
3.0
Yes
Yes
10 (3/8)
13 (1/2)
27 (1-1/16)
24 (15/16)
3.4 (7.6)3.3 (7.2)
1.3 (3.0) for DX01,
1.4 (3.0) for DX02
22 with DC18RC (DC18RA*
2)
Note: The standard equipment for the tool
shown above may vary by country.
Bit shank
Chuck capacity: mm (")
Adapted for SDS-PLUS
Steel
Wood
Concrete
Reverse switch
Yes
Variable speed control
by switch trigger
YesConstant speed control
Clutch (Torque limiter)
Weight of Dust
extracting system: kg (lbs)
Weight according to EPTA-
Procedure 01/2003: kg (lbs)
*2: for North and Central American countries only
Side grip assembly ............................ 1
Depth gauge (Stopper pole) .............. 1
Plastic carrying case
......................... 1
Quick change drill chuck set
for BHR243 (LXRH02*1) only ....... 1
0 - 950
0 - 4,700Blows per min.: (bpm=min
-1)
No load speed: (min
-1= rpm)
Quick change drill chuck No Yes
Operation mode
3 modes
(Rotation only/ Rotation with Hammering/
Hammering only)
*1 Model number for North and Central American countries.
H
L
W
BHR242
BHR243
Dimensions: mm (")
Height (H)
Length (L)
372(14-5/8)
397(15-5/8)
287 (11-1/4)
Width (W) 88 (3-1/2)
DX01
DX02
DX01, DX02
These are the accessories as Makita’s first Dust extracting system exclusively
for model BHR242 (LXRH01*1), BHR243 (LXRH02*1).
This system is designed to collect dust effectively with on-off operation
of the tool’s on-off trigger switch interlocked with this system.
Note: • This system can be applied for concrete drilling only and comes with
Dust case, Filter and 5 pcs. of extra Sealing caps.
• The following parts are available optionally:
Dust case set, Filter set, Plastic carrying case (can be stored with BHR242
or BHR243)
Model
BHR242
(LXRH01*
1)
BHR243
(LXRH02*1)
Capacity: Ah
54
Energy capacity: W
Li-ion
SDS-PLUS bits, Taper shank T.C.T bits,
Taper shank adapter, Cotter, Center bit,
Core bit adapter, Drill chuck assembly,
Chuck adapter, Drill chuck S13,
Chuck key S13, Keyless drill chuck,
Tool holder set, Dust cup 5 & 9,
Dust cup set, Bull point, Cold chisel,
Grooving chisel, Scaling chisel,
Scraper assembly, Grease vessel 30g,
Blow out bulb, Safety goggles,
Bit grease, Plastic carrying case,
Battery BL1830,
Fast charger; DC18RA*2, DC18RC,
Charger; DC18SC, DC24SC,
Automotive charger DC18SE,
Dust extraction system (DX01, DX02)
L
H
W