Filter
Top Products
P 20/ 25
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-9. Motor of Dust extraction system DX01, DX02
Fig. 65
Fig. 66
Note: Special repairing tool and Lubricant are not required.
(1) Separate Housing R and eight 4x18 Tapping screws from Housing L.
(2) Remove Baffle plate, Filter plate, Sponge sheet C and Motor complete as an assembled part. (Fig. 65)
Assemble the components by reversing the disassembly procedure.
Guide plate, Cushion and four Rubber pins 4 are on not only Housing R but also Housing L, and therefore, be careful not
to drop their parts.
DISASSEMBLING
ASSEMBLING
Guide plate
Motor complete
Note: Replacing Fan separately is not allowed.
Baffle plate
Baffle plate
Sponge sheet C
Cushion
Rack B
Earth rubber
Rubber pin 4 (4 pcs. on this side)