Filter
Top Products
Fig. 35
[3] DISASSEMBLY/ASSEMBLY
[3]-5. Torsion spring 6 for Connector, Battery housing
ASSEMBLING
Repair
P 12/ 25
A
B
C
Cushion
rubber (R)
Cushion rubber (L)
(behind Terminal)
Rubber pin 5
Pin 1.5
See Fig. 35.
Set Torsion spring 6 into Housing L, and then assemble Connector to Compression spring 6. Refer to A .
Set Opener in place. Refer to B .
When Battery housing L and R are matched, do not fail to assemble the parts shown in C .
Hold one end of Torsion spring 6
with the inner wall of Housing L.
Align the chamfered side
of Opener with the walls
of Housing L.
Insert the hinge of Connector
into the coil of Torsion spring 6.
Hook the opposite end
of Torsion spring with
the step of Housing L.
Battery housing set
(Housing set)
Cushion
Opener