Filter
Top Products
5.
Cutting crown and cover moldings
*Crown and cove moldings can be cut on
a
compound miter saw with the moldings
laid flat on the turn base.
*There are two common types
of
crown moldings and one type of cove moldings;
52/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle
cove molding. See illustrations below.
Ceiling Ceiling Ceiling
52/38' type 45" type
45" type
crown molding
crown molding cove molding
*There are crown and cove molding joints which are made to fit "Inside"
90"
corners
(0
and
0)
in Fig.
C)
and "Outside"
90"
corners
(0
and
@
in Fig.
C).
-
-
Inside corner Outside corner
I
Fig.
(C)
Inside
corner
Outside
corner
20