Filter
Top Products
. A complete Parts List is available at www.MillerWelds.com
OM-4430 Page 33
SECTION 8 − MAINTENANCE & TROUBLESHOOTING
8-1. Routine Maintenance
. Follow the storage procedure in the engine owner’s manual if the unit will not be used for an extended period.
! Stop engine before maintaining.
. See Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
Recycle engine
fluids.
n = Check Z = Change ~ = Clean l = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
8
Hours
Section 5-2
n Fuel Level n Oil Level ~ Oil, Fuel Spills
Every
25
Hours
Section 8-3,
8-4
n~ Spark Arrestor Screen ~ Air Cleaner Wrapper
Every
50
Hours
~ Weld Terminals
Every
100
Hours
Engine
Manual,
Section 8-4,
8-5
~ Battery Terminals ~ Cooling System Z Oil nl Air Cleaner Element
Every
200
Hours
Engine
Manual,
Section 8-5
l Unreadable Labels n Spark Plug Gap Z Oil Filter l Fuel Filter
Every
500
Hours
nl Weld Cables n~ Slip Rings*
nl Brushes*