Miller Electric 280 NT Welding System User Manual


 
. A complete Parts List is available at www.MillerWelds.com
OM-4430 Page 37
! Stop engine.
Open left side door.
. When a supplementary protec-
tor or fuse opens, it usually indi-
cates a more serious problem
exists. Contact a Factory Au-
thorized Service Agent.
1 Supplementary Protector CB4
CB4 protects the stator winding
supplying 24 volt ac output to Re-
mote receptacle RC4. If CB4
opens, 24 volt ac output to RC4
stops.
. Supplementary Protector CB3
protect the stator winding sup-
plying 115 volt ac output to Re-
mote Receptacle RC4 (see
Section 7-1).
Press button to reset.
2 Fuse F6 (See Parts List)
F6 protects the engine wiring sys-
tem from overload. If F6 opens,
engine will not crank.
Replace fuse if open.
Close left side door.
803 773A / Ref. 216 172-D
8-6. Overload Protection
2
1