Miller Electric XMS 4000 Welder User Manual


 
OM-224 043 Page 7
207 290
=
100 h. std.
21 3
5
4
7
6
1 Warning! Watch Out! There are
possible hazards as shown by the
symbols.
2 Disconnect input plug or power before
working on machine.
3 Wear approved safety glasses with
side shields while working on the unit.
4 Plugged filter or hoses can cause
overheating to the power source and
torch.
5 Every 100 hours, check and clean filter
and check condition of hoses.
6 Read Owner’s Manual.
7 Use coolant suggested by
manufacturer.
(B) 050024004
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Falling unit can cause injury.
Do not move or operate unit
where it could tip.
3 Cylinders can expolde if
damaged. Protect
compressed gas cylinders
from excessive heat,
mechanical shock, slag, open
flames, sparks, and arcs.
1
23
1
S-176 106
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Moving parts can cause injury.
Keep away from moving parts
such as fans.
1
2