Filter
Top Products
35
Raise — Lower Controls
This saw uses a 12-volt hydraulic pump and cylinder to raise and lower the
blade. The SP-6457 TD saw has a plunge button and a raise button. Controls are
located on the joystick handle.
Fig. 16 — Joystick Handle Controls
1. To slowly lower the blade to the cut, push the top button (1).
2. For a fast plunge to the cut, push the bottom button (2).
3. For a very fast plunge, press both buttons simultaneously.
4. To lift the blade, hold down the Raise button on the side of the handle (3).
See the Maintenance section of this manual for an illustration of the Raise-Lower
System components, and troubleshooting techniques.
1
2
3