Multiquip SP-6457 TD Saw User Manual


 
50
Installing the Inner Blade Collar
1. Ensure that the tapered portion of the Blade Shaft, and the Inner Blade Collar
are perfectly clean and free of burrs or indentations. Clean and repair as
necessary
2. Ensure that the Drive Key is in place.
3. Slide the Inner Collar onto the tapered portion of the Blade Shaft
DO NOT use any lubricant! Lubricant prevents the tapered surfaces of the
Collar and Shaft from mating properly.
4. Install the Outer Blade Collar, Collar Bushing, and Mounting Bolt.
Tighten with a ½” impact wrench to seat the tapered surfaces of the Inner
Collar and Blade Shaft.
Fig. 32 — Installing the Inner Blade Collar
Drive Key
Blade Shaft
Inner Collar
Outer Collar
Collar Bushing
Mounting Bolt
Dowel pin