Filter
Top Products
41
Night Light
The night light can be used on either side of the saw, and can be extended and
rotated for best illumination of the cutting area. Aim the light, then lock it in
position by tightening the lock knobs. The light can be removed for storage by
loosening the lock knobs, disconnecting the light cord and sliding the light bar
out of the saw.
Fig. 22 — Night Light
Transportation Tie-downs and Lift Point
Tie-downs
The saw is provided with holes at each corner of the lower frame for easy tie-
down during transportation. The ½” all-thread J-bolts, with which your saw
was attached to its shipping pallet, can be used in a variety of tie-down scenarios.
It is highly recommended that the saw be tied down any time it is being transported.
Fig. 23 —Tie-down Points
Lock
Knob
Lock
Knob
Tie-down
Tie-down