Patton electronic 2603 Router User Manual


 
Introduction 90
Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration
Edit DHCP server list: The IP addresses of DHCP servers can be updated, reset, or deleted from the list.
Add new DHCP server: the IP addresses of the DHCP servers are added to the DHCP relay list in this sec-
tion.
In the first section of the DHCP Relay webpage, click on the Enable button on the DHCP Relay webpage.
Figure 62. DHCP Relay webpage
In the third section of the DHCP Relay webpage, enter the IP address of a DHCP server, and click on the Cre-
ate button. (See figure 63.) The IP addresses will appear in the section section, ‘Edit DHCP server list.’
In the second section, you may update or delete the DHCP server IP addresses. (See figure 63.)
To update or change a DHCP server IP address, enter the desired IP address over the IP address which is no
longer valid. Click on the Update button. With this action, you do not need to delete the IP address and sub-
sequently add a new IP address. It is one action.
To delete a DHCP server IP address, check the ‘Delete?’ box for the appropriate IP address and click on the
Update button.