Patton electronic 2635 Router User Manual


 
RJ-45 shielded 10/100 Ethernet port 125
Models 2603, 2621, and 2635 Getting Started Guide D • IPLink Physical Connectors
RJ-45 shielded 10/100 Ethernet port
Assuming the MDI-X switch is in the out position.
RJ-45 non-shielded RS-232 console port (EIA-561)
The RS-232 serial control port of the IPLink is configured to operate as a DCE.
Table 7. Ethernet Port (MDI-X switch in out position)
Pin No. Signal Name Direction
1 TX+ from IPLink
2 TX- from IPLink
3 RX+ to IPLink
4
5
6 RX- to IPLink
7
8
Table 8. RS-232 Control Port
Pin No. Signal Name Direction
1 DSR from IPLink
2 CD from IPLink
3 DTR to IPLink
4 Signal Ground -
5 RD from IPLink
6 TD to IPLink
7 CTS from IPLink
8 RTS to IPLink