Filter
Top Products
WAN Service Configuration 56
Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services
6. Click on Create.
Figure 31. Edit IP address of WAN port
7. Click on Services Configuration > IP Routes > Create new Ip V4 Route. Create the gateway to the remote
router by entering the WAN IP address of the remote router, in this example, enter 192.168.164.3 in the
Gateway field. (See figure 32.)
8. Click the Update button.
Figure 32. Configuring the gateway
The other fields should be:
• Destination: 0.0.0.0
• Gateway: 192.168.164.3
• Mask: 0.0.0.0
• Cost: 1
• Interface: [blank]
You can see the status of the PPP link by going to the ‘Edit PPP’ web page and paging down until you see the
“Summary” description. In figure 33 the PPP link is in the Establishment phase. To get to the ‘Edit PPP’ web
page, follow this path: Services Configuration > WAN > Edit... > Edit ‘PPP’