Filter
Top Products
10
Figure 2
(items not to scale)
7.0 Setup and assembly
7.1 Shipping contents
(See Figure 2)
Qty.
A Lamps ................................................... 2
B Spur center ........................................... 1
C Live center with pin .............................. 1
D Leveling foot ......................................... 4
E Comparator spur center ....................... 1
F Comparator dead center ...................... 1
G Vacuum chuck ...................................... 1
H Air blow gun with hose ......................... 1
I Vacuum adaptor support bracket ......... 1
J Vacuum adaptor ................................... 1
K Knock-out rod ...................................... 1
L Combination wrench, 19mm ................. 1
M Face plate wrench ................................ 1
N Comparator bracket .............................. 1
O Guard bracket ....................................... 1
P 14” Tool rest .......................................... 1
Q Tool caddy ............................................ 1
R Guard .................................................... 1
S Legs ..................................................... 2
T Face Plate ............................................. 1
U Lamp holder set .................................... 1
V Lathe bed with Headstock/Tailstock/
Toolrest Base/Remote switch ............... 1
Hardware Package (p/n 4224B-HP):
HP-1 Socket head cap screw, 3/8x1-1/4 ... 2
HP-2 Socket head cap screw 3/8x1-1/2 .. 10
HP-3 Lock washer 3/8 .............................. 12
HP-4 Flat washer 3/8 ................................ 10
HP-5 Socket head cap screw 1/2x1........... 2
HP-6 Lock washer 1/2 ................................ 2