Filter
Top Products
6
Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a
Model OES9138 Oscillating Edge Sander. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.
Specifications
Model Number ....................................................... OES9138 ..................................................... OES9138
Stock Number.......................................................... 1791282 .......................................................1791293
Motor .......................................................... 3HP, 1Ph, 230V ............. 3HP, 3Ph, 230/460V (prewired 230)
Belt Size (in.) ....................................................... 9 x 138-3/4 ................................................... 9 x 138-3/4
Platen Size (in.) ..................................................... 9-1/2 x 48 ..................................................... 9-1/2 x 48
Table Working Height (in.) ............................ 34-1/2 to 40-3/4 ............................................34-1/2 to 40-3/4
Main Table Size (L x W) (in.)................................ 48 x 11-3/4 ................................................... 48 x 11-3/4
Main Table Tilt (deg.) ..................................... 5 in and 45 out ............................................. 5 in and 45 out
End Table Size (in.) ................................................ 18 radius ...................................................... 18 radius
End Table Tilt (deg.) .................................... 40 in and 45 out ........................................... 40 in and 45 out
Belt Speed (FPM) ......................................................... 3,542 ........................................................... 3,542
Oscillations per Minute ..................................................... 24 ................................................................ 24
Drum Diameter (in.) ................................ 4 Outboard, 9 Drive ...................................... 4 Outboard, 9 Drive
Dust Connection Diameter - Two (in.) ................................. 4 .................................................................. 4
Dust Collection Minimum CFM Required ....................... 1,100 ........................................................... 1,100
Overall Dimensions (L x W x H) (in.) .................. 83 x 32 x 50 ................................................. 83 x 32 x 50
Shipping Dimensions (L x W x H) (in.) .......... 86 x 27 x 44-1/2 ........................................... 86 x 27 x 44-1/2
Weight Shipping/Net (lbs.) ........................................ 870/800 ....................................................... 870/800
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Powermatic reserves the right to change specifications at any time and without
prior notice, without incurring obligations.