Filter
Top Products
13.
14.
-
Dart
to
remove
Rotor
Front bracket
Descrlptlon
I
Remarks
4.
Screw the bolt into the thread of the
rotor shaft.
5.
Torque the bolt using a socket wrench
until the rotor comes off loose.
*
The hydraulic pressure inside the rotor
shaft
takes
apart the
rotor
from the
engine shaft.
(4) Wipe off oil throughly from rotor shaft
and engine
PTO
shaft.
Fig.
10-24
(1)
Remove the front bracket, which
is
mounted on the main bearing cover
of
the engine,
by
taking out four
M8
X
18
bolts.
(See
Fig.
10-25.)
Fig.
10-25
-
40
-
Tool
12mm box spanner
or
Socket wrench
12mm box spanner