Filter
Top Products
11
=
TROUBLESHOOTING
-
11-1
NO
AC
OUTPUT
11-1 -1
CHECKING STATOR
1) Remove control panel and disconnect couplers on
wiring.
2)
Measure the resistance between terminals on
stator leads.
Refer to Table
9-1
(page
28)
for normal re-
sistance.
[Remedy]
If
stator
is
defective, replace with new one.
Fig.
11-1
11
-1
-2
CHECKING
CONDENSER
w
If an instrument (Q.C.-meter or C-meter) for measuring capacity of condenser
is
available, check the
capacity
of
condenser.
NORMAL CAPACITY
OF
CONDENSER
1
OpF
w
If
you do not. have such an instrument, you can check condenser by replacing with new one and test
running.
If
the generator perform normally with new condenser, the cause
of
trouble
is
defect in original
condenser.
1 1-1
-3
CHECKING ROTOR
1) Remove rear cover and stator.
-
48
-