Filter
Top Products
12
TO INSTALL SAW BLADE
See Figure 4.
n Remove battery pack.
WARNING: Failure to remove battery pack from
saw could result in accidental starting causing
possible serious personal injury.
n Lift blade clamp lock / release lever located on side of
saw.
n Insert saw blade between blade clamp and saw bar.
n Lock blade clamp lever.
n Replace battery pack.
BATTERY PORT
LATCH
Fig. 3
BATTERY PACK
DEPRESS LATCH TO
RELEASE BATTERY PACK
Fig. 4
BLADE SHOWN
CORRECT IN SAW BAR
BLADE
BLADE CLAMP
BLADE CLAMP LOCK /
RELEASE LEVER
TO INSTALL /
TO RELEASE
TO LOCK
TO REMOVE / ATTACH BATTERY PACK
See Figure 3.
TO REMOVE:
n Locate latches on side of battery pack and depress
both sides to release battery pack from your saw.
n Remove battery pack from your saw.
TO ATTACH:
n Place the battery pack in your saw aligning raised rib
on battery pack with groove in saw's battery port.
n Make sure the latches on each side of the battery
pack snap into place and battery pack is secured to
saw before beginning operation.
CAUTION: When placing battery pack in the tool,
be sure raised rib on battery pack aligns with the
bottom of the saw and latches into place properly.
Improper installation of the battery pack can cause
damage to internal components.
OPERATION