Sharp PW-E500A Stud Sensor User Manual


 
34
• Approx. 55 hours
If data is searched for 5 minutes and displayed for
55 minutes with 2 minute backlight use per hour at
25°C (77°F)
Note: May vary according to various usage conditions
Weight (including battery): Approx. 156 g (0.35 lb)
Dimensions (when closed): 125 mm (W)
×
79.4 mm (D)
×
16.8 mm (H)
4-29/32” (W)
×
3-1/8” (D)
×
21/32” (H)
Accessories: Alkaline battery LR03 (size “AAA”)
×
1,
operation manual
Troubleshooting
Refer to the list of possible symptoms, and solutions may be found here.
The unit cannot be switched on.
Check if the battery is not drained. See page 32.
Check the battery replacement switch; it should be set at the ‘NORMAL
OPERATION’ position. See page 3.
Check the polarity of the battery. See page 3.
•Verify the LCD contrast setting; the power may be switched on, but the
message on the screen may not be visible. See page 13.
If the above settings appear normal, then press the RESET switch. See page
33.
The backlight cannot be switched on.
Check if the battery is exhausted. See page 32.
The screen is dark or light.
Adjust the LCD contrast. See page 13.
The key sound cannot be heard.
The key sound may be set to OFF. See page 12.
The unit does not respond to a key press.
Press the RESET switch. See page 33.
The unit shuts off automatically.
The Auto power off function is in action. The activation interval of the Auto
power off function can be adjusted. See page 13.
The desired word cannot be found.
•A variant form of the word may have been entered. Enter the original form.
Use the Spellcheck function to verify spellings.
Product support
If you have read this operation manual, but you still require product support, you
can:
Visit our web site
http://www.sharp.co.uk
Or Telephone
08705 274277