Filter
Top Products
-3-
M1014 7" x 12" Metal Cutting Bandsaw
INTRODUCTION
Controls and Features
A
A. Blade Tension Knob—Allows you to quickly
tension or de-tentsion the blade.
B. Blade Guide Knob—Allows you to move and
lock the blade guide in place.
C. Cutting Fluid Flow Valve—Allows you to
adjust the cutting fluid flow rate.
D. Gear Box—Allows the motor to achieve a
mechanical advantage when cutting.
E. Blade Guide/Chip Brush—Guides stop blade
twist and brush removes chips from blade.
F. Pulley Cover—Covers the pulleys for safety.
Open cover to make blade speed changes.
G. Heavy Duty Motor—Dual voltage (prewired
110V), 1 HP motor drives the bandsaw wheels
for smooth cutting.
H. Circuit Breaker—Protects the bandsaw motor
and pump electrical system from overload.
I. Drain and Chip Pan—Collects chips and
cutting fluid, and directs fluid to the
reservoir.
J. Hydraulic Cylinder Feed Rate Dial—Allows
you to adjust the bandsaw feed rate
accurately.
K. Feed ON/OFF Valve—Toggles the headstock
feed ON and OFF for operation or Service.
L. Cutting Fluid Pump ON/OFF Switch—Toggles
power ON and OFF to the pump motor.
M. Bandsaw ON/OFF Switch—Toggles power ON
and OFF to the bandsaw motor.
N. Handle—Allows you to tilt the bandsaw and
use the wheels to move the machine.
O. Vise Clamp Wheel—Allows you to quickly
close and clamp the vise on the workpiece.
P. Blade Tension Gauge—Allows you to visually
locate the correct blade tension.
Bandsaw controls and features.
P
B
C
F
H
G
D
E
J
K
L
M
O
N
I