Filter
Top Products
ASSEMBLY
-13-
General
The main components of the SHOP FOX
®
W1686
are assembled at the factory; however, some
assembly is required.
Table/Trunnion
To attach the table/trunnion assembly:
1. With the assistance of a helper, carefully lift
the table/trunnion assembly onto the top of
the sander base.
2. Align the mounting holes in the trunnions
with the mounting holes in the sander base.
3. Using the (4)
3
⁄
8"-16 x 1
1
⁄
4" hex bolts and (4)
3
⁄8" lock washers, secure the table/trunnion
assembly to the sander base as shown in
Figure 4.
NOTICE
DO NOT overtighten the mounting bolts as
this may strip the threads from the cast iron
components.
Figure 4. Secure the table/trunnion assembly
to the sander base using the supplied hex
bolts and lock washers.
Safety glasses are
absolutely required dur-
ing assembly. Serious
injury may occur if this
warning is ignored!
Make sure that your
machine remains
unplugged during any
adjustments or mainte-
nance procedures.
Ignoring this warning may
result in serious personal
injury!
Loose clothing and long
hair must be secured
and kept away from
moving parts.
Get assistance before lift-
ing the table/trunnion
assembly. Personal injury
can occur if assistance is
not used when lifting the
table/trunnion assembly.