Filter
Top Products
SAFETY
-6-
Additional Safety Instructions For Sanders
1. Spindle Rotation: Always brace workpiece against the rotation of the sanding spindle.
2. Finger Safety: Always keep fingertips away from the moving spindle.
3. Sanding Rate: Always use light pressure when holding the workpiece against the sanding spindle.
5. Personal Safety Equipment: Always wear ANSI-approved safety glasses, ear plugs and dust mask.
6. Sand Safe Stock: Always sand stock that is clean and free of defects.
7. Sanding Sleeves: Always replace sanding sleeves that are damaged or worn out.
8. Develop Good Habits: Always follow directions and safety warning to develop good habits.
9. Air Quality: Make sure there is good ventilation and a constant source of fresh air near the operat-
ing sander and always use a dust collector.
10.Allergic Reactions: The saw dust from some species of wood can be toxic to some people. Be sure
to research the dangers of the specific species of wood you are sanding.
INSTRUCTION MANUAL
MODEL W1686
SPINDLE SANDER
Phone: 1-360-734-3482 • On-Line Technical Support: tech-support@woodstockint.com
COPYRIGHT © AUGUST, 2002 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in Taiwan
Use this and other machinery with caution
and respect and always consider safety
first, as it applies to your individual working
conditions. Remember, no list of safety
guidelines can be complete and every shop
environment is different. Failure to follow
guidelines can result in serious personal
injury, damage to equipment and/or poor
work results.
Read and understand this
entire instruction manual
before using this machine.
Serious personal injury may
occur if safety and opera-
tional information is not
understood and followed.
Do not risk your safety by
not reading!