Filter
Top Products
OPERATIONS
-21-
OPERATIONS
Test Run
Once assembly is complete, the machine is
ready for a test run. The purpose of a test run is
to identify any unusual noises and vibrations.
To test run the machine:
1. Turn the machine on. Be sure to have your
finger poised to turn the machine off if there
is a problem.
2. Once the machine is running, listen for any
unusual noises. The machine should run
smoothly with little or no vibrations.
3. If there are any unusual noises or vibrations,
shut the machine off immediately. The
machine should not be run any further until
the problems are corrected.
4. Unplug the machine, investigate the source
of the noise or vibration, and correct the
source of the noise or vibration. Do not make
any adjustments to the machine while it is
plugged in.
5. Repeat Steps 1-4 until the machine runs
smoothly.
Always wear a dust mask
and safety glasses in addi-
tion to using a dust col-
lector. This machine pro-
duces sawdust that may
cause allergic reactions
or respiratory problems.
Loose clothing and long
hair must be secured
and kept away from
moving parts.
Make sure that your
machine remains
unplugged during any
adjustments or mainte-
nance procedures.
Ignoring this warning may
result in serious personal
injury!