Filter
Top Products
-16-
W1677/W1711 10" Table Saw
SETUP
Depending on which model you purchased, your saw will
come with standard length rails or long rails. The Shop
Fox Original fence includes extra hardware for mounting it
to other brands of table saws.
The inventory list below and Figure
s 16 & 17 show only
the hardware needed to mount the fence to your saw. To
avoid confusion, we suggest removing any items not listed
here from your immediate work area. The hardware list
below is categorized by application.
Inventory Needed for Your Saw
Standard Rails (Figure 16): Qty
A. Shop Fox Original Fence ..................................1
B. Front Rail ...................................................1
C. Rear Rail ....................................................1
D. Scale .........................................................1
E. End Braces ..................................................2
F. Rail End Covers ............................................4
Long Rails (Figure 17): Qty
A. Shop Fox Original Fence ..................................1
B. Extension Table ............................................1
C. Legs ..........................................................2
D. Feet ..........................................................2
E. Front Rail 72" ..............................................1
F. Back Rail 72" ...............................................1
G. Scale .........................................................1
H. End Braces ..................................................2
I. Table Leg Braces ..........................................2
J. Rail End Covers ............................................4
Shop Fox Original Fence
Inventory
Common Rail/Table Mounting Hardware:
• Hex Bolts
3
⁄8-16 x 1" (R Rail/Main Table) .. 2
• Low Profile Hex Bolts
3
⁄8-16 x 1"
(F Rail/Main Table) ...........................
2
• Flat Washers
3
⁄8" (Rail/Main Table) ........ 8
• Hex Bolts
3
⁄8-16 x 1" (End Braces) .......... 2
• Flat Washers
3
⁄8" (End Braces) .............. 2
• Hex Nuts
3
⁄8"-16 (End Braces) ............... 2
• Flat Hd Screw
1
⁄4"-20 x
5
⁄8" (End Braces) .. 1
• Flat Washer
1
⁄4" (End Braces) ............... 1
• Hex Nut
1
⁄4"-20 (End Braces) ................ 1
• Fence Stop ......................................
1
• Phlp Hd Screw 10-24 x 5/8" ..................
1
• Flat Washer #10 ...............................
1
Additional Hardware Only for Long Rail
s:
• Hex Bolts
3
⁄8"-16 x 1
3
⁄4" (Rail/Ext Table) .. 8
• Flat Washers
3
⁄8" (Rail/Ext Table) .........16
• Hex Nuts
3
⁄8"-16 (Rail/Ext Table) ........... 8
• Hex Nuts
1
⁄2" (Feet Jam Nuts) ............... 2
• Wood Screws
1
⁄4" x
3
⁄4" (Brace/Ext Table) 2
• Fender Washers
1
⁄4" (Brace/Ext Table) .... 2
• Hex Bolts
3
⁄8"-16 x
3
⁄4" (Brace/Leg) ........ 2
• Flat Washers
3
⁄8" (Brace/Leg) ............... 2
• Flat Washers
3
⁄8" (Spacers for Brace/Leg) . 8
• Wood Screws #8 x
3
⁄4" (Leg/Ext Table) ...12
Figure 16. Original fence inventory for
standard fence rails.
A
B
C
D
Figure 17. Original fence inventory for
long fence rails.
A
B
C
D
E
F
H
I
G
J
E
F