-15-
W1737/W1738 Owner's Manual (Mfg. 10/09+)
The Model W1737/W1738 features dust ports and
adapters located on top of the machine as shown in
and. Before performing any sanding
operations,attachthedustportstoa2HPorbetterdust
collector, which can draw at least 1,500 CFM, or dust
buildup will hinder the performance of your sander.
Even with a sufficient dust collection system, a fine
layer of dust may still be present on your stock as it
comes out of the sander. This residual dust is a normal
condition.
The Model W1737/W1738 has a breather sealing pin
installed in the breather plug for the gear reducer.
Remove this pin before using your sander (see
);otherwise,thegearoilwillexpandwithheat
and the seals in the gear reducer may leak due to the
pressure build up.
You may want to retain this pin if you plan on storing
your sander for a long period of time.
Dust collection hose
attached to dust port.
Dust collection adapters.
Breather sealing pin removed.
Remove
Breather
Pin