Filter
Top Products
-16-
W1737/W1738 Owner's Manual (Mfg. 10/09+)
Control panel interface.
Below is a summary of your sander control panel and
the components that it controls. Use the list with
to become familiar with your sander.
• :
Indicates the current amp load on the sanding
motor when a sanding operation is in progress.
• :
Turns the sanding motor
ON and OFF if
the sander has air pressure and the belt is
tensioned.
• : Indicates the conveyor lift motor is
operating.
• : Indicates the sander is waiting for
new numerical dimension values.
• : Displays current sander
settings.
• :
Manually cycles the table lift motor to raise and
lower the table.
• :PressandholdtheSETbuttonfor
3 seconds to calibrate display at the current
boardthickness;orpressandholdkeyfor
10 seconds to toggle the display between
metric and standard measurement.
• : Cycles
the conveyor motor
ON and OFF for
feeding wood into the sander.
• : Indicates when machine has
power to the control panel.
• : Stops all electrical
power to motors in event of emergency,
andstopssandingdrumswithanair-disc
brake.
• : Cycles the table
lift motor in and out of the automatic raise
and lower function.
• :Allowsyoutoinputyournumerical
sanding specifications for automated
sanding control.
Sanding
Load
Amp
Meter
Sanding
Belt Stop
Button
Table
Start
Key
Table
Stop
Key
Table
Down
Key
Table
Up
Key
Table
Set
Key
Key
Pad
Feed
Belt
Stop
Button
Emergency
Stop
Button
Power
Lamp
Feed
Belt
Start
Button
Digital
Readout
Sanding
Belt
Start
Button
Run
LED
Input
LED