Woodstock W1752 Lathe User Manual


  Open as PDF
of 40
 
-10-
W1752 Owner's Manual (Mfg. 1/07+)


     

    



We do not recommend using an extension cord; however,
if you have no alternative, use the following guidelines:
• UseacordratedforStandardService(S).
• Do not use a cord longer than 50 feet.
• Ensurethatthecordhasagroundwireandpin.
• Usethegaugesizelistedbelowasaminimum.


The Model W1752 is wired for 110V operation. Always con-
nect this machine to a dedicated circuit (wire, breaker,
plug, receptacle) with a verified ground, using the recom-
mended circuit size and plugs/receptacles listed at the
bottom of this page.
We recommend connecting this machine to a dedicated
circuit with a verified ground, using the circuit size given
below. Never replace a circuit breaker with one of higher
amperage without consulting a qualified electrician to
ensure compliance with wiring codes.
This machine must be grounded! The electrical cord sup-
plied with this machine comes with a grounding pin. If
your outlet does not accommodate a ground pin, have it
replaced by a qualified electrician.




    
110V Operation 6 Amps 15A NEMA 5-15 14 Gauge
 5-15 plug and receptacle.

 previous next