Filter
Top Products
-19-
W1752 Owner's Manual (Mfg. 1/07+)
The faceplate can be installed only if the spur center has
been removed from the headstock spindle. The knock-out
bar is included with the lathe for installing and removing
the faceplate.
UNPLUG LATHE FROM POWER!
Remove the spur center (see ).
Thread the faceplate onto the headstock spindle.
Using the knock-out bar, hand tighten the faceplate
as shown in .
: Reverse Steps 3-4 to remove the faceplate.
. Tightening faceplate.