-14-
W1752 Owner's Manual (Mfg. 1/07+)
Complete this process once you have familiarized yourself
with all instructions in this manual
The test run consists of verifying the following: 1) The
motor powers up and runs correctly, and 2) the safety
paddle switch works correctly.
Read the entire instruction manual first!
Make sure all tools and foreign objects have been
removed from the machine.
Review and connect your machine to the
power source.
Flip the paddle switch up to turn the machine ON
.
Make sure that your hand stays poised over the
switch in case you need to quickly turn the machine
OFF.
— If you suspect any problems, immediately turn the
lathe OFF and disconnect the machine from the
power, and refer to to troubleshoot/fix
any problems before starting the lathe again.
— If the source of an unusual noise or vibration is
not readily apparent, contact our technical sup-
port for help at (360) 734-3482 or contact us
online at
Turn the machine OFF.
Remove the safety key and attempt to turn the
machine ON.
— If the machine starts, stop it. The switch disabling
feature is not working. This safety feature must
work properly before proceeding. Contact our
technical support for help.
— If the machine does not start, the switch disabling
feature is working.