Filter
Top Products
-18-
W1752 Owner's Manual (Mfg. 1/07+)
11. Removing spur center using
knock out bar.
UNPLUG LATHE FROM POWER!
Hold a clean rag under the spindle or wear a glove
to catch the center when you remove it.
Insert the knock-out bar through the outboard end
of the spindle and tap the center (as shown in
). Catch the center as it falls out.
Loosen the quill lock handle (if locked) approximate-
ly half a turn counterclockwise.
Rotate the quill handwheel clockwise until the
tailstock quill protrudes out of the tailstock housing
about
3
/4''.
Insert the live center, as shown in , and
push firmly.
Tighten the lock handle.
Turn the quill handwheel counterclockwise until the
tailstock quill bottoms out, causing the center to be
forced out of the quill.
. Installing live center.
Quill Handwheel
Quill
Quill Lock Handle