Filter
Top Products
-12-
W1752 Owner's Manual (Mfg. 1/07+)
Some workbenches may require
additional reinforcement to support both
the machine and the operator. Make sure
you take these precautions.
Consider existing and
anticipated needs, size of material to be
processed through the machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your lathe.
Lighting should be bright enough
to eliminate shadow and prevent eye strain.
Electrical circuits must be
dedicated or large enough to handle
amperage requirements. Outlets must be
located near each machine, so power or
extension cords are clear of high-traffic
areas. Follow local electrical codes for
proper installation of new lighting, outlets,
or circuits.
The bed and other unpainted parts of your lathe
are coated with a waxy grease that protects
them from corrosion during shipment. Clean this
grease off with a solvent cleaner or citrus-based
degreaser. DO NOT use chlorine-based solvents
such as brake parts cleaner or acetone—if you
happen to splash some onto a painted surface,
you will ruin the finish.