Filter
Top Products
-26-
W1752 Owner's Manual (Mfg. 1/07+)
Lubricate the locations shown in
with light machine oil.
Regular periodic maintenance on your SHOP FOX
®
Model W1752 will ensure its optimum performance. Make
a habit of inspecting your machine each time you use it.
• Loosemountingbolts.
• Wornordamagedwires.
• Wornswitch
• Anyotherunsafecondition.
• Belttension,damage,orwear.
• Clean/vacuumdustbuildupoffofmotor.
Protect the unpainted cast iron surfaces on the lathe by
wiping them clean after every use—this ensures moisture
from wood dust does not remain on bare metal surfaces.
Keep the bed rust-free with regular applications of quality
metal protectant products.
Cleaning the Model W1752 is relatively easy. Vacuum excess
wood chips and sawdust, and wipe off the remaining dust
with a dry cloth. If any resin has built up, use a resin dis-
solving cleaner to remove it.
Perform in the proce-
dure on .
Roll the belt off of the pulleys and slide it under the
belt cover plates.
Reverse to reinstall the belt.
Lubrication locations