Filter
Top Products
-17-
W1756/W1757 43" Wide-Belt Sander
SETUP
• Floor Load: This machine distributes a
heavy load in a small footprint. Some shop
floors may require additional bracing to
support both machine and operator.
• Working Clearances: Consider existing and
anticipated needs, size of material to be
processed through the machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your
wide-belt sander.
• Lighting: Lighting should be bright enough
to eliminate shadow and prevent eye strain.
• Electrical: Electrical circuits must be
dedicated or large enough to handle
amperage requirements. Outlets must be
located near each machine, so power or
extension cords are clear of high-traffic
areas. Follow local electrical codes for
proper installation of new lighting, outlets,
or circuits.
• Dust Collection: Place this machine as
close to your dust collector as possible to
eliminate long runs of large ducting and
improve dust collection from the machine.
Cleaning Machine
The upper sanding drum on this machine is
coated with a waxy grease that protects it from
corrosion during shipment. Clean this grease off
with a solvent cleaner or citrus-based degreaser.
DO NOT use chlorine-based solvents such as
brake parts cleaner or acetone—if you happen to
splash some onto a painted surface, you will ruin
the finish.
Machine Placement
USE helpers or power
lifting equipment to lift
this wide-belt sander.
Otherwise, serious
personal injury may
occur.
MAKE your shop “child
safe.” Ensure that your
workplace is inaccessible
to kids by closing and
locking all entrances when
you are away. NEVER allow
untrained visitors in your
shop when assembling,
adjusting or operating
equipment.
NEVER clean with gasoline
or other petroleum-based
solvents. Most have
low flash points, which
make them extremely
flammable. A risk of
explosion and burning
exists if these products
are used. Serious personal
injury may occur if this
warning is ignored!
ALWAYS work in well-
ventilated areas far from
possible ignition sources
when using solvents to
clean machinery. Many
solvents are toxic when
inhaled or ingested. Use
care when disposing
of waste rags and
towels to be sure they
DO NOT create fire or
environmental hazards.